Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
shark_notes [2020/05/10 11:44]
matt
shark_notes [2020/05/10 11:44] (current)
matt
Line 1: Line 1:
 ===== Viewing Wireless Traffic ===== ===== Viewing Wireless Traffic =====
 Sniffer Mode AP\\ Sniffer Mode AP\\
-     To convert UDP traffic into client traffic you have to decode frames as PeekRemote. Another step has to be taken to decode the traffic now. Preferences > Protocol > IEEE 802.11 > Choose type and enter the ssid password. +To convert UDP traffic into client traffic you have to decode frames as PeekRemote. Another step has to be taken to decode the traffic now. Preferences > Protocol > IEEE 802.11 > Choose type and enter the ssid password.
 \\ \\
 \\ \\
 WLC to FTP Server\\ WLC to FTP Server\\
-     To view client traffic again you will probably need to go to references > Protocol > IEEE 802.11 > Check Ignore the Protection bit Yes – without IV+To view client traffic again you will probably need to go to references > Protocol > IEEE 802.11 > Check Ignore the Protection bit Yes – without IV
  
 \\ \\